The dataset contains the extraction of one of the target species, cod, for the period 2016-2021. The extraction of cod data set is based on "Fish extraction - commercial fisheries HOLAS 3". Further information about how this dataset was collected and extracted can be found at: https://metadata.helcom.fi/geonetwork/srv/eng/catalog.search#/metadata/a0104cfd-d237-459b-84f8-8e9e21d2df9b Reported per ICES Rectangles, Russian data extracted from ICES annual reports, reported per ICES sub-divisions. Values are redistributed with fishing effort data c-squares (all gears) 2016-2021. Effort values missing from Russia and sub-basin average values given. Extraction of fish species (landings) per ICES c-squares, average of 2016-2020. Landings calculated per km2. Tons/km2 calculated for each species. For cod, recreational fisheries catches were added. Log-transformed and normalized.

The dataset reflects the spatial delineation of river catchments in the Baltic Sea drainage area. The data is based on the reporting by Contracting Parties within in the HELCOM Pollution Load Compilation (PLC) framework. The catchments consist of monitored river catchments and unmonitored coastal areas. The delineation of the catchments can be connected to the flow and nitrogen and phosphorous load information available in the PLC assessment data set (https://metadata.helcom.fi/geonetwork/srv/eng/catalog.search#/metadata/441f878f-67e7-4aa8-927e-8f5e073dc893). The river catchments consist of whole rivers, meaning that although a river would run through several countries or would be a border river between two countries, the catchment is not split into separate sub-catchments. The unmonitored areas are aggregated based on PLC subbasins and country areas, thus forming areas such as the unmonitored area of Finnish Gulf of Finland, Polish Baltic Proper or Danish Kattegat. Attribute information: SourceCode: Unique code for river catchment Name: Name of river catchment SubBasin: The PLC subbasin where the river meets the sea. Country: The Country on which territory the river mouth is located, for border rivers both are mentioned. Monitoring: The monitoring status of the river (M=monitored and U=unmonitored). Marked as monitored only if it’s been monitored for the whole time series. Transbound: Listing all countries that have the rivers drainage area on its territory. Area_km2: The total area of the catchment in square kilometers. flow_1995...flow_2022: The water flow of the river catchment for the whole time-series TN_1995...TN_2022: Total nitrogen load of the river catchment for the whole time-series TP_1995...TP_2022: Total phosphorus load of the river catchment for the whole time-series

This dataset is built from following Human activities datasets: • https://metadata.helcom.fi/geonetwork/srv/eng/catalog.search#/metadata/3d6bd6f9-72d5-40cf-aaaa-b7c0c18878e3 • https://metadata.helcom.fi/geonetwork/srv/eng/catalog.search#/metadata/41da8e41-d907-419d-8841-f95062d002e7 The game hunting of seabirds data (see separate metadata): The total number of hunted seabirds were averaged over 2016-2021 (number of hunted seabirds / year). The area of the reporting unit was used to calculate the number of hunted seabirds / km2 and the data was converted to 1km x 1km grid. The predator control of seabirds data (see separate metadata): The total number of hunted cormorants were averaged over 2016-2021 (number of hunted cormorants / year). The area of the reporting unit was used to calculate the number of hunted cormorants / km2 and the data was converted to 1km x 1km grid. The two datasets were first separately log transformed and then summed, to get the total value for each grid cell. Zero values were given to all grid cells with no reported seabird hunting activity. The layer was normalized.

This dataset describes fishing intensity for Seine mobile bottom contacting gear in 2012 based on VMS/Log book data processed by ICES Working Group on Spatial Fisheries Data (WGSFD). ICES secretariat collected during 2017 relevant VMS and logbook data for 2009-2016 to produce, as a technical service to HELCOM, updated spatial data layers on fishing intensity/pressure. Improved data quality control checks were implemented. Submitted data across the HELCOM area have improved in quality compared to previous data 2009-2013 published in 2015. Standardized methods were used to produce the requested data layers. The code used to create the data products is available here: https://github.com/ices-eg/wg_WGSFD For further technical information on the advice request, see http://www.ices.dk/sites/pub/Publication%20Reports/Advice/2017/Special_requests/helcom.2017.18.pdf HELCOM secretariat did the following processing to the shapefile provided by ICES: - Conversion to ETRS89LAEA coordinate system - Added feature and attribute "Reported" to display unreported areas. Dataset attribute information: c-square: Unique reference of the c-square polygon Year: Year of fishing activity mid_lat: latitude coordinate of the centroid of c-square inWGS84 decimal degrees mid_lon: longitude coordinate of the centroid of c-square inWGS84 decimal degrees SurfaceSAR: Surface area ratio (Swept area, < 2 cm penetration depth of the gear components) Subsurface: Subsurface area ratio (Swept area, subsurface =>2 cm penetration depth of the gear components) totweight: Total Weight (kg) totvalue: Total value (Euros) Kw Fishing Hours: (Kw*h) Fishing hours: (h) Reported: Yes=Reported data. No= No reported data (area that does not contain effort/intensity value due to lack of reported data). Please note that this dataset was updated (v2) in January 2019, see further details below in the lineage section.

This dataset describes fishing intensity for Otter mobile bottom contacting gear in 2010 based on VMS/Log book data processed by ICES Working Group on Spatial Fisheries Data (WGSFD). ICES secretariat collected during 2017 relevant VMS and logbook data for 2009-2016 to produce, as a technical service to HELCOM, updated spatial data layers on fishing intensity/pressure. Improved data quality control checks were implemented. Submitted data across the HELCOM area have improved in quality compared to previous data 2009-2013 published in 2015. Standardized methods were used to produce the requested data layers. The code used to create the data products is available here: https://github.com/ices-eg/wg_WGSFD For further technical information on the advice request, see http://www.ices.dk/sites/pub/Publication%20Reports/Advice/2017/Special_requests/helcom.2017.18.pdf HELCOM secretariat did the following processing to the shapefile provided by ICES: - Conversion to ETRS89LAEA coordinate system - Added feature and attribute "Reported" to display unreported areas. Dataset attribute information: c-square: Unique reference of the c-square polygon Year: Year of fishing activity mid_lat: latitude coordinate of the centroid of c-square inWGS84 decimal degrees mid_lon: longitude coordinate of the centroid of c-square inWGS84 decimal degrees SurfaceSAR: Surface area ratio (Swept area, < 2 cm penetration depth of the gear components) Subsurface: Subsurface area ratio (Swept area, subsurface =>2 cm penetration depth of the gear components) totweight: Total Weight (kg) totvalue: Total value (Euros) Kw Fishing Hours: (Kw*h) Fishing hours: (h) Reported: Yes=Reported data. No= No reported data (area that does not contain effort/intensity value due to lack of reported data). Please note that this dataset was updated (v2) in January 2019, see further details below in the lineage section.

Observations of Lutra lutra were collected from the Baltic Sea area for HELCOM Red List species list. The HELCOM Red List of Baltic Sea species in danger of becoming extinct (2013) is the first threat assessment for Baltic Sea species that covers all marine mammals, fish, birds, macrophytes (aquatic plants), and benthic invertebrates, and follows the Red List criteria of the International Union for Conservation of Nature (IUCN). Almost 2800 species were considered in the Red List assessment and about 1750 were evaluated according to the IUCN Red List criteria. Lutra lutra has been placed to the Red List category of Near Threatened (NT) species.

Observations of Mya truncata were collected from the Baltic Sea area for HELCOM Red List species list. The HELCOM Red List of Baltic Sea species in danger of becoming extinct (2013) is the first threat assessment for Baltic Sea species that covers all marine mammals, fish, birds, macrophytes (aquatic plants), and benthic invertebrates, and follows the Red List criteria of the International Union for Conservation of Nature (IUCN). Almost 2800 species were considered in the Red List assessment and about 1750 were evaluated according to the IUCN Red List criteria. Mya truncata has been placed to the Red List category of Near Threatened (NT) species. Dataset for download contains spatial grid of the Baltic Sea. Distribution of the species can be found in corresponding name column. Values are coded: 1 - Present before year 2000 or in 2000, 2 - Present after year 2000, 3 - Present both before and after year 2000.

This dataset contains the most up-to-date reported data about monitoring hazardous substances - metals stations in the Baltic Sea.

This dataset contains results on HELCOM Assessment unit level 4b for shallow water oxygen. The information provided represents the data and results from the HELCOM HOLAS 3 indicator evaluation for eutrophication, covering the data period from 2016-2021. Shallow Water Oxygen results are reported by Contracting Parties based on data collected on national level by the Contracting Parties applying the indicator. Coastal assessment units (WFD water types or water bodies) are assessed based on WFD result data reported by countries. Indicator analysis of both open sea and coastal areas is carried out using the HEAT assessment tool (https://github.com/ices-tools-prod/HEAT). This analysis provide the basis of the HELCOM indicator evaluations and are utilized in the HOLAS 3 thematic assessment of eutrophication. Attribute description: ES = Eutrophication Status ES_SD = Standard Deviation ES_N = Number of Observations ES_N_Min = Minimum Number of Observations any given year ES_SE = Standards Error ES_CI = Confidence Interval ET = Eutrophication Target / Threshold ER = Eutrophication Ratio ACDEV = Acceptable Deviation BEST = ET / (1 + ACDEV / 100) EQR = Ecological Quality Ratio EQR_HG = Ecological Quality Ratio High/Good Boundary EQR_GM = Ecological Quality Ratio Good/Moderate Boundary EQR_MP = Ecological Quality Ratio Moderate/Poor Boundary EQR_PB = Ecological Quality Ratio Poor/Bad Boundary EQRS = Ecological Quality Ratio Scaled GTC = General Temporal Confidence STC = Specific Temporal Confindence TTC = Total Temporal Confidence GSC = General Spatial Confidence SSC = Specific Spatial Confidence TSC = Total Spatial Confidence TC = Total Confidence

This dataset contains all dioxinsstations by sub-basin in the Baltic Sea as reported to the HELCOM MORE project.