This core indicator evaluates the status of the marine environment based on the reproductive status of seals in the Baltic Sea. Quantitative thresholds are used to evaluate if core indicators status is Achieve, Fail or Not assessed. Good status is achieved when the annual reproductive rate (i.e. pregnancy/birth rate) is at least 90% for five years and older (harbour seals) and six years and older (grey and ringed seals). Currently, a full status evaluation has only been carried out for the grey seal based on Finish and Swedish data. The indicator is applicable for all species of seals and marine mammals that occur in the Baltic Sea, however the amount of data have so far been insufficient for an evaluation of other marine mammal species. This dataset displays the result of the indicator in HELCOM Assessment Scale 1 (Whole Baltic). Attribute information: "Species" = Species "CODE" = Code of the assessment unit "Assessment" = Assessment unit name "Threshold" = Threshold value of core indicator "Result value" = Result value of core indicator "Binomial proportion confidence interval" "Status" = Status for the whole indicator "Notes" = Additional information "AULEVEL" = Assessment unit level used for the indicator "ConfA" = Confidence of classification "ConfT" = Temporal confidence of classification "ConfS" = Spatial confidence of classification "ConfM" = Methodological confidence of classification

This core indicator evaluates the status of the marine environment based on the arrival of new non-indigenous species. The new NIS have been detected both through regular environmental monitoring activities and incidental sightings. The data have been verified by national experts. Monitoring is not considered to sufficiently cover all areas of the Baltic Sea and hot spot areas for new introductions (e.g. ports) to allow for the conclusion that in areas where no new NIS have been observed there have not been any new introductions. This dataset displays the result of the indicator in HELCOM Assessment Scale 1 (whole Baltic Sea). Attribute information: "level_1" = Name of the HELCOM scale 1 assessment unit "Area (km2)" = Area of the HELCOM scale 1 assessment unit "Status" = Status of the indicator (“Achieve”, “Fail” or “Not assessed”) "AULEVEL" = Assessment unit level used for the indicator

This dataset describes fishing intensity for surface mobile bottom contacting gear in 2012 based on VMS/Log book data processed by ICES Working Group on Spatial Fisheries Data (WGSFD). ICES secretariat collected during 2017 relevant VMS and logbook data for 2009-2016 to produce, as a technical service to HELCOM, updated spatial data layers on fishing intensity/pressure. Improved data quality control checks were implemented. Submitted data across the HELCOM area have improved in quality compared to previous data 2009-2013 published in 2015. Standardized methods were used to produce the requested data layers. The code used to create the data products is available here: https://github.com/ices-eg/wg_WGSFD For further technical information on the advice request, see http://www.ices.dk/sites/pub/Publication%20Reports/Advice/2017/Special_requests/helcom.2017.18.pdf HELCOM secretariat did the following processing to the shapefile provided by ICES: - Conversion to ETRS89LAEA coordinate system - Added feature and attribute "Reported" to display unreported areas. Dataset attribute information: c-square: Unique reference of the c-square polygon Year: Year of fishing activity mid_lat: latitude coordinate of the centroid of c-square inWGS84 decimal degrees mid_lon: longitude coordinate of the centroid of c-square inWGS84 decimal degrees SurfaceSAR: Surface area ratio (Swept area, < 2 cm penetration depth of the gear components) Subsurface: Subsurface area ratio (Swept area, subsurface =>2 cm penetration depth of the gear components) totweight: Total Weight (kg) totvalue: Total value (Euros) Kw Fishing Hours: (Kw*h) Fishing hours: (h) Reported: Yes=Reported data. No= No reported data (area that does not contain effort/intensity value due to lack of reported data). Please note that this dataset was updated (v2) in January 2019, see further details below in the lineage section.

This dataset represents the underlying sediment data on core indicator Heavy metals – Cadmium. The core indicator evaluates the status of the marine environment based on concentrations of heavy metal cadmium (Cd) in seawater, mussels and sediments. Quantitative thresholds are used to evaluate if core indicators status is Achieve, Fail or Not assessed. Threshold values are based on Environmental quality standards (EQS), defined at EU level for substances included in the priority list under the Water Framework Directive. Attribute information: "region" = name of subbasin "country" = country "station" = Unique code for the station "stationNam" = name for the station "determinan" = determinant parameter (CD = Cadmium) "detGroup" = the grouping of determinands used to display the results "_shape" = shape used to map assessment results "colour" = colour used to map assessment results "l3area" = HELCOM assessment unit on scale 3 "l4area" = HELCOM assessment unit on scale 4 "nyall" = total number of years of data "nyfit" = number of years of data used in the assessment "nypos" = number of years with at least one measurement above the limit of detection "lastyear" = most recent year of data "prtrend" = the significance of the change over the most recent 20 years; for the assessment conducted in November 2017 and published in June 2018, this is the period 1996-2016 "rtrend" = annual ‘linear’ change over the most recent 20 years "meanLY" = fitted value in last monitoring year "clLY" = upper one-sided 95% confidence limit on fitted value in last monitoring year "EQS" = Threshold value "EQSdiff" = difference between clLY and EQS "EQSbelow" = whether the mean value in the last monitoring year is significantly below EQS

This dataset represents the underlying water data on core indicator Heavy metals – Cadmium. The core indicator evaluates the status of the marine environment based on concentrations of heavy metal cadmium (Cd) in seawater, mussels and sediments. Quantitative thresholds are used to evaluate if core indicators status is Achieve, Fail or Not assessed. Threshold values are based on Environmental quality standards (EQS), defined at EU level for substances included in the priority list under the Water Framework Directive. Attribute information: "region" =name of subbasin "country" = country "station" = Unique code for the station "stationNam" = name for the station "determinan" = determinant parameter (CD = Cadmium) "detGroup" = the grouping of determinands used to display the results "filtered" = Filtered or unfiltered water sample used in analysis "_shape2 = shape used to map assessment results "colour" = colour used to map assessment results "l3area" = HELCOM assessment unit on scale 3 "l4area" = HELCOM assessment unit on scale 4 "nyall" = total number of years of data "nyfit" = number of years of data used in the assessment "nypos" = number of years with at least one measurement above the limit of detection "lastyear" = most recent year of data "prtrend" = the significance of the change over the most recent 20 years; for the assessment conducted in November 2017 and published in June 2018, this is the period 1996-2016 "rtrend" = annual ‘linear’ change over the most recent 20 years "meanLY" = fitted value in last monitoring year "clLY" = upper one-sided 95% confidence limit on fitted value in last monitoring year "EQS" = Threshold value "EQSdiff" = difference between clLY and EQS "EQSbelow" = whether the mean value in the last monitoring year is significantly below EQS

The commercial landings data has been extracted from the Scientific, Technical and Economic Committee for Fisheries (STECF) Expert Working Group on Fisheries Dependent Information, and data for Russia was extracted from ICES annual reports from the Baltic Fisheries Assessment Working Group (WGBFAS). Attribute specification and units: ICESNAME: ICES rectangle code t2016-2020: Annual landing value in tonnes AVG: Average of landings per rectangle

Observations of Merlangius merlangus were collected from the Baltic Sea area for HELCOM Red List species list. The HELCOM Red List of Baltic Sea species in danger of becoming extinct (2013) is the first threat assessment for Baltic Sea species that covers all marine mammals, fish, birds, macrophytes (aquatic plants), and benthic invertebrates, and follows the Red List criteria of the International Union for Conservation of Nature (IUCN). Almost 2800 species were considered in the Red List assessment and about 1750 were evaluated according to the IUCN Red List criteria. Merlangius merlangus has been placed to the Red List category of Vulnerable (VU) species. The map shows the sub-basins in the HELCOM area where the species is known to occur regularly and to reproduce (HELCOM 2012).

This dataset represents the underlying biota data on core indicator Heavy metals – Lead.The core indicator evaluates the status of the marine environment based on concentrations of heavy metal Lead (Pb) in water, fish liver and sediments. Quantitative thresholds are used to evaluate if core indicators status is Achieve, Fail or Not assessed. Threshold values are based on Environmental quality standards (EQS), defined at EU level for substances included in the priority list under the Water Framework Directive. The Core indicator displays the result of the indicator in HELCOM Assessment Scale 4 (Division of the Baltic Sea into 17 sub-basins and further division into coastal and off-shore areas and division of the coastal areas by WFD water types or water bodies). Attribute information: "region" = name of region "country" = country "station" = Unique text that identifies the station "stationNam" = name for the station "determinan" = determinant parameter (PB = Lead) "detGroup" = the grouping of determinands used to display the results "species" = species of measurement "_shape" = shape used to map assessment results "colour" = colour used to map assessment results "l3area" = HELCOM assessment unit on scale 3 "l4area" = HELCOM assessment unit on scale 4 "nyall" = total number of years of data "nyfit" = number of years of data used in the assessment "nypos" = number of years with at least one measurement above the limit of detection "lastyear" = most recent year of data "prtrend" = the significance of the change over the most recent 20 years; for the assessment conducted in November 2017 and published in June 2018, this is the period 1996-2016 "rtrend" = annual ‘linear’ change over the most recent 20 years "meanLY" = fitted value in last monitoring year "clLY" = upper one-sided 95% confidence limit on fitted value in last monitoring year "HQS" = Threshold value "HQSdiff" = difference between clLY and HQS "HQSbelow" = whether the mean value in the last monitoring year is significantly below HQS

This dataset describes fishing intensity for SDN DMF mobile bottom contacting gear in 2010 based on VMS/Log book data processed by ICES Working Group on Spatial Fisheries Data (WGSFD). ICES secretariat collected during 2017 relevant VMS and logbook data for 2009-2016 to produce, as a technical service to HELCOM, updated spatial data layers on fishing intensity/pressure. Improved data quality control checks were implemented. Submitted data across the HELCOM area have improved in quality compared to previous data 2009-2013 published in 2015. Standardized methods were used to produce the requested data layers. The code used to create the data products is available here: https://github.com/ices-eg/wg_WGSFD For further technical information on the advice request, see http://www.ices.dk/sites/pub/Publication%20Reports/Advice/2017/Special_requests/helcom.2017.18.pdf HELCOM secretariat did the following processing to the shapefile provided by ICES: - Conversion to ETRS89LAEA coordinate system - Added feature and attribute "Reported" to display unreported areas. Dataset attribute information: c-square: Unique reference of the c-square polygon Year: Year of fishing activity mid_lat: latitude coordinate of the centroid of c-square inWGS84 decimal degrees mid_lon: longitude coordinate of the centroid of c-square inWGS84 decimal degrees SurfaceSAR: Surface area ratio (Swept area, < 2 cm penetration depth of the gear components) Subsurface: Subsurface area ratio (Swept area, subsurface =>2 cm penetration depth of the gear components) totweight: Total Weight (kg) totvalue: Total value (Euros) Kw Fishing Hours: (Kw*h) Fishing hours: (h) Reported: Yes=Reported data. No= No reported data (area that does not contain effort/intensity value due to lack of reported data). Please note that this dataset was updated (v2) in January 2019, see further details below in the lineage section.

This dataset describes fishing intensity for OT DMF mobile bottom contacting gear in 2011 based on VMS/Log book data processed by ICES Working Group on Spatial Fisheries Data (WGSFD). ICES secretariat collected during 2017 relevant VMS and logbook data for 2009-2016 to produce, as a technical service to HELCOM, updated spatial data layers on fishing intensity/pressure. Improved data quality control checks were implemented. Submitted data across the HELCOM area have improved in quality compared to previous data 2009-2013 published in 2015. Standardized methods were used to produce the requested data layers. The code used to create the data products is available here: https://github.com/ices-eg/wg_WGSFD For further technical information on the advice request, see http://www.ices.dk/sites/pub/Publication%20Reports/Advice/2017/Special_requests/helcom.2017.18.pdf HELCOM secretariat did the following processing to the shapefile provided by ICES: - Conversion to ETRS89LAEA coordinate system - Added feature and attribute "Reported" to display unreported areas. Dataset attribute information: c-square: Unique reference of the c-square polygon Year: Year of fishing activity mid_lat: latitude coordinate of the centroid of c-square inWGS84 decimal degrees mid_lon: longitude coordinate of the centroid of c-square inWGS84 decimal degrees SurfaceSAR: Surface area ratio (Swept area, < 2 cm penetration depth of the gear components) Subsurface: Subsurface area ratio (Swept area, subsurface =>2 cm penetration depth of the gear components) totweight: Total Weight (kg) totvalue: Total value (Euros) Kw Fishing Hours: (Kw*h) Fishing hours: (h) Reported: Yes=Reported data. No= No reported data (area that does not contain effort/intensity value due to lack of reported data). Please note that this dataset was updated (v2) in January 2019, see further details below in the lineage section.