From 1 - 8 / 8
  • The dataset contains the location of fossil fuel energy production facilities derived from the European Pollutant Release and Transfer Register (E-PRTR). E-PRTR cover all HELCOM Contracting Parties except Russia. Attribute specification and units: See E-PRTR code lists at https://www.eionet.europa.eu/schemas/eprtr/listOfValues In the HELCOM data review process, some facility locations appeared to be spatially slightly misplaced, adding up to uncertainty of data products derived from this dataset.

  • The data set contains information on the location of individual turbines of the offshore wind farms in the Baltic Sea area. In addition to information on the location of the wind farms, the following information is included: Name, Country, Status (Generating power or under construction), Company, Capacity MW (whole park), number of turbines (whole park), construction year and source.

  • Dataset contains the aircrafts in the Baltic Sea area capable of oil spill surveillance. Dataset contains the aircrafts in the Baltic Sea area capable of oil spill surveillance. The locations of the aircrafts are symbolic, representing only the home country of the aircraft. See also the use restrictions -section. ATTRIBUTES: - AIRCRAFT : type name of the aircraft - TYPE : type of aircraft (airplane, helicopter) - SPEED_KN : speed in knots - ENDURANC : flight time (hours) - HOURS_YE : surveillance flight hours per year - RS_EQUIP : surveillance equipment For information about HELCOM's air surveillance activities, see: http://www.helcom.fi/shipping/waste/en_GB/surveilance.

  • Dataset represent urban land use (urban areas) around Baltic Sea coast. The resolution of the data is 250 m x 250 m. The dataset is constructed from CORINE Land Cover (CLC) 2006 for EU countries and from Open street map (OSM) open source data in Russia. Dataset is based on data collated for the HELCOM Second Holistic Assessment of the Ecosystem health of the Baltic Sea. The dataset covers the whole catchment area of the Baltic sea.

  • Dataset contains the vessels in the Baltic Sea area with towing capacity in an emergency situation (over 25 tons of bollard pull). The locations of the ships are approximate, derived from the homeport of the vessel. Dataset contains the vessels in the Baltic Sea area with towing capacity in an emergency situation (over 25 tons of bollard pull). The locations of the ships are approximate, derived from the homeport of the vessel. See also the use restrictions -section. ATTRIBUTES: - X : longitude of the location (at homeport, in WGS 84) - Y : latitude of the location (at homeport, in WGS 84) - BOLLARDP : towing capacity of the vessel (tons of bollardpull) - READINES : readiness (hours) - ROUGHSEA : rough sea capabilities - SOURCE : possible source of the information - NOTICE : additional information For more information about HELCOM's response activities, see: http://www.helcom.fi/groups/response/en_GB/main.

  • Total (monthly, and 5 year average) discharge from hydropower dams (m3/s). Data includes the water that passes the turbines as well as the water not passing the turbines. The data was made available by HELCOM Contracting Parties in response to data request. The data was received from Estonia, Finland and Sweden. The activity was declared as not relevant in Denmark, Germany, Latvia, Lithuania and Poland. Data contains only those hydropower dams that are situated closest to the Baltic coast (less than 40 km), are the first ones from the coast in the river network and have a direct connection to the Baltic Sea trough river. Swedish data is a combination of actual measurements and modelling. Modelled data have been calculated with s-hype2012_version_3_0_0. These data are also presented online at http://vattenwebb.smhi.se/regulations/. Please note that data from 2015 is provisional and may be subject to revisions. Attribute specification and units: X_Long: X (East) coordinate point Y_Lat: Y (North) coordinate point Country: Country (EE=Estonia, FI=Finland, SE=Sweden) ID: Name or ID number of the hydropower dam AVG_year: A calculated yearly average discharge (m3/s) (2011-2015) jan_2011 – dec_2015 : Monthly discharge (m3/s)

  • Dataset contains the vessels in the Baltic Sea area capable of fire fighting (over 5000 liters/min). The locations of the ships are approximate, derived from the homeport of the vessel. Dataset contains the vessels in the Baltic Sea area capable of fire fighting (over 5000 liters/min). The locations of the ships are approximate, derived from the homeport of the vessel. See also the use restrictions -section. ATTRIBUTES: - X : longitude of the location (at homeport, in WGS 84) - Y : latitude of the location (at homeport, in WGS 84) - FIRECAPACI : fire fighting capacity of the vessel (l/min) - READINES : readiness (hours) - ROUGHSEA : rough sea capabilities - SOURCE : possible source of the information - NOTICE : additional information. For more information about HELCOM's response activities, see: http://www.helcom.fi/groups/response/en_GB/main.

  • Dataset contains the vessels in the Baltic Sea area with capacity (over 200 m^3) to store recovered oil in an accident situation. Dataset contains the vessels in the Baltic Sea area with capacity (over 200 m^3) to store recovered oil in an accident situation. The locations of the ships are approximate, derived from the homeport of the vessel. See also the use restrictions -section. ATTRIBUTES: - X : longitude of the location (at homeport, in WGS 84) - Y : latitude of the location (at homeport, in WGS 84) - STORAGE : storage capacity of the vessel (m^3) - READINES : readiness (hours) - ROUGHSEA : rough sea capabilities - SOURCE : possible source of the information - NOTICE : additional information. For more information about HELCOM's response activities, see: http://www.helcom.fi/groups/response/en_GB/main.